How To Replace Front Shock Absorbers On Peugeot 3008 Mk1 A Step By Guide

Learn how to replace the front shock absorbers of your Peugeot 3008 mk1 with this comprehensive guide. Follow detailed step-by-step instructions and safety tips to ensure a successful repair.

• This guide explains how to replace the front shock absorbers of a Peugeot 3008 mk1 step by step.
• It provides detailed instructions, including tools needed and safety precautions.

Replacing the front shock absorbers on your Peugeot 3008 mk1 may seem like a daunting task, but with the right guidance and tools, it can be accomplished effectively. In this step-by-step guide, we'll walk you through the entire process, from preparation to completion, ensuring your car's suspension system is in top shape.

- Prepare Your Vehicle

1. Start by turning off your engine and engaging the parking brake.
2. Release the hood latch and open the hood to access the front shock absorbers.

- Remove Windshield Wipers

3. To access the front shock absorbers, you'll need to remove the windshield frame and wipers.
4. Before removing the wipers, mark their placement with tape to reinstall them correctly.
5. Use a ratchet and 13mm socket to loosen the nuts on the windshield wiper arms.
6. Carefully remove the wiper arms, and if needed, use a wiper arm remover for assistance.
7. Remove plastic coverings and the waterproofing joint from the windshield frame.
8. Unscrew the central holding screw with a T30 TORX socket to release the windshield frame.

- Access Shock Absorbers

9. With the windshield frame removed, you can access the front shock absorbers.
10. Spray the shock absorber head's screw with anti-seize lubricant.
11. Use a 21mm offset wrench and a 7mm Allen wrench to lightly unscrew the holding nut on the shock absorber cup.
12. Loosen the lug nuts on the front wheels and safely jack up your vehicle using jack stands.

- Remove Stabilizer Bar Link

13. To access the shock absorbers, the front wheels must be removed.
14. Don't forget to slide the wheels under the vehicle as a safety precaution.
15. A professional alignment check should be performed after this step.
16. Remove the stabilizer bar link that connects the stabilizer bar to the shock absorbers.

- Disconnect Shock Absorber

17. Brush the threads at the bottom of the shock absorber and apply anti-seize lubricant.
18. Use a t-handle wrench and an 18mm socket to loosen the screws at the bottom of the shock absorber.
19. Hold the nuts with an 18mm spanner and remove the screws.
20. Disconnect the bottom of the shock absorber from the stub axle.
21. Prepare an elevated surface for the stub axle once it's removed.
22. Finish unscrewing the top shock absorber cup.

- Remove and Replace Shock Absorber

23. Hold the shock absorber and finish unscrewing the top cup.
24. Carefully remove the shock absorber from the spring.
25. Install the new shock absorber by pinching the rod vertically to separate the gas and hydraulic fluid.
26. Screw in the elements, including the shock absorber's stop, sleeve, upper spring support, and shock absorber cup.
27. Tightly secure the shock absorber cup using a 21mm offset wrench and a 7mm Allen wrench.
28. Align the centre stud of the cup with the insertion tabs of the stub axle.
29. Carefully unscrew the spring compression tool and ensure proper spring placement.

- Reattach Shock Absorber

30. Insert the shock absorber top-end first and attach the upper cup.
31. Secure the cup with a holding nut.
32. Reconnect the shock absorber to the stub axle.
33. Reattach the screws and nuts, then tighten them using a torque wrench.
34. Put the stabilizer bar link back in place and tighten it with a torque wrench.
35. Reinstall your vehicle's wheels and lower the car to the ground.

- Complete the Operation

36. Replace the windshield frame, making sure to reposition rainwater scuttle drains.
37. Reattach side covers, plastic coverings, and the seal.
38. Reinstall the windshield wiper arms, ensuring a proper fit.

Congratulations, you've successfully replaced the front shock absorbers on your Peugeot 3008 mk1, improving your car's suspension system.

By following these detailed instructions and taking necessary safety precautions, you can tackle this repair with confidence. Don't forget to check the video description for recommended tools and products to assist in this process.

All rights reserved. Unauthorized reproduction, in whole or in part is strictly prohibited.